《Tetsu To Hagane-journal Of The Iron And Steel Institute Of Japan》重点专注发布工程技术-冶金工程领域的新研究，旨在促进和传播该领域相关的新技术和新知识。鼓励该领域研究者详细地发表他们的高质量实验研究和理论结果。该杂志创刊至今，在工程技术-冶金工程领域，有较高影响力，对来稿文章质量要求较高，稿件投稿过审难度较大。欢迎广大同领域研究者投稿该杂志。
| CiteScore | SJR | SNIP | CiteScore排名 | |||
|---|---|---|---|---|---|---|
| 0.7 | 0.235 | 0.399 | 学科类别 | 分区 | 排名 | 百分位 |
|
大类：大类：MaterialsScience
小类：小类：MetalsandAlloys
|
Q4 | 145/176 | 17% | |||
|
大类：大类：MaterialsScience
小类：小类：MaterialsChemistry
|
Q4 | 276/317 | 13% | |||
|
大类：大类：MaterialsScience
小类：小类：CondensedMatterPhysics
|
Q4 | 405/434 | 6% | |||
|
大类：大类：MaterialsScience
小类：小类：PhysicalandTheoreticalChemistry
|
Q4 | 177/189 | 6% | |||
| 按JIF指标学科分区 | 收录子集 | 分区 | 排名 | 百分位 |
|---|---|---|---|---|
| 学科：METALLURGY & METALLURGICAL ENGINEERING | SCIE | Q4 | 86 / 90 | 5% |
| 按JCI指标学科分区 | 收录子集 | 分区 | 排名 | 百分位 |
|---|---|---|---|---|
| 学科：METALLURGY & METALLURGICAL ENGINEERING | SCIE | Q4 | 87 / 91 | 4.95% |
文章名称
引用次数
Time-resolved and In-situ Observation of delta-gamma Transformation during Unidirectional Solidification in Fe-C Alloys
6
Detection of Free-lime in Steelmaking Slag by Cathodoluminescence Method
6
Crystal Plasticity Simulation on Effect of Heterogeneous-nanostructure Induced by Severe Cold-rolling on Mechanical Properties of Austenitic Stainless Steel
4
Evaluation of Coke Degradation Effect on Flow Characteristics in Packed Bed Using 3D Scanning for Rotational Mechanical Strength Test and Solid-liquid-gas Three-phase Dynamic Model Analysis
4
Development of Microstructurally Small Fatigue Crack Initiation and Growth Evaluation Method Using Automatic In-situ Observation System with Digital Image Correlation Technique
4
Evaluation of Dislocation Density in Cold Worked Low Carbon Ferritic Steel
4
Discussion about Procedure for Determining Parameter alpha in Modified Williamson-Hall Method
4
Overview of Dynamic Strain Aging and Associated Phenomena in Fe-Mn-C Austenitic Steels
4
Phase-field Simulation of Recrystallization in Cold Rolling and Subsequent Annealing of Pure Iron Exploiting EBSD Data of Cold-rolled Sheet
3
Development of Shape Meter Employing LED Dot Pattern Projection Method for Hot Strip Finishing Mill
3
